Perazzi MT6 Receiver and Butt stock. Selective, non-removable trigger

Perazzi MT6 Receiver and Butt stock Description:
From my collection that I am thinning out. I have an MT6 Receiver and butt stock. This is a non-removable, selective trigger. This receiver will accept any square Mono Block Perazzi barrel. It will mate together but may or may not need final fitting from a gunsmith. It is in great shape. Lucio Sosta has just gone through the receiver replacing the top lever return spring, firing pins, firing pin springs and the bottom barrel hammer. The butt stock is original to the receiver. The LOP is 14.25". DAC 1 3/8", with the small step rib and mid height rib. DAH is about 2.25". There is some blue wear on the trigger bow. This receiver will not work with MX3, MX5, MX6 or MX7 barrels. They are rounded mono block barrels. It will work with all other square mono block barrels. A great bargain to build a back up gun. Jim Veta. 310-291-1784. jveta@aol.com

Price: $800.00

Manufacturer: Perazzi
Model: MT6
Serial Number: 101456
Caliber: 12ga.
Condition: 90%
Wood Condition: 90%
Action: Hammerless Boss style
Triggers: selective, non removable
Stock: Pistol grip
Stock Dimensions:
14.25 LOP
Stock Drop: 2.25 at heel
Stock Comb: 1 3/8"
Stock Cast: 1/4" cast off
Butt Pad: Kick Eeeze
Manufacture Date: approx. 1978

.

 

Jim,
Would this action require a certain barrel type and forearm? Type 3 vs. Type 4?

 

You can use a type three barrel as long as you use your type three
Forend. Same with a type four barrel. Use its forend and you are good to
Go. Again, as I mentioned, in my description. The barrels will mate
To the receiver but it is likely it will need
Final fitting by a gunsmith to get a proper lock up with the top lever to
The five o clock position.

 

Here you go one inexpensive Perazzi. The other site has a barrel and forend at a great price.

threads/mx8-barrel.801195/

I'd post yours on their site but I would get banned

 

Up

 

Please show as sold.