Krieghoff KS-5 Hanger numbers

I have a KS-5 hanger in a box with the only mark on it is a 0. Does that mean it shoots
100% high? The hanger on the gun cannot be seen. Where are the numbers located?

 

The 0 Hanger Is 100% High.

 

I shoot a number 3 hanger. Works great for me

 

I keep this in my files:
Krieghoff Barrel Hangers

Krieghoff factory front hanger allows changes in point of impact of bottom barrel. Available for both Choke-tubed and Fixed choke barrel configurations. Please note that Briley or Teague choked K-80 will have a Fixed Choke barrel profile so choose the hanger for fixed choke bar- rels.

The change in point of impact will vary with barrel length and the only way to determine the ex- act amount is by pattern testing. As a rough guide you can estimate that each change of hanger size will move the POI 65mm (2.5") at 30 metres.

It is important to understand that the numbering system for CT hangers is not the same as that for Fixed Choke hangers. The barrel diameter of the Choke tube barrels is larger and so a #1 CT Hanger is roughly equivalent to a #3 Fixed Choke hanger. This means that a Choke Tubed gun shooting to your preferred POI with a #4 hanger equates to a #6 Hanger on a Fixed Choke pair of barrels. This is a guide only and you do need to pattern test to establish the exact hang- er.

Hangers are easily changed by driving out the cross pin with the correct sized pin punch (1.4mm). Remove the hanger
Available Options:Hanger Size:

#1 (0.5mm)#2 (1.0mm)#3 (1.5mm)#4 (2.0mm)#5 (2.5mm)#6 (3.0mm)#7 (3.5mm)#8 (4.0mm)

 

The ( 0 ) is the highest shooting hanger not necessarily 100%

GB..........................DLS