F/S: Wenig New American Beretta 390/391/A400 RH Stock SOLD

Wenig New American stock for Beretta 390/391 12ga guns. Will also fit the A400 with a minor modification to the inletting. This should also fit the currently manufactured A300 as well as the 3901, but you'd have to verify that. Right hand offset, toe out, and palm swell.

It appears this was a DIY stock that someone completed on their own. Stock has been finished in a high gloss poly finish, a few dents and dings, the kind of condition you'd expect to see after a season of use. There appears to be some tiny white specks under the finish in a few spots (hard to notice unless you're looking for it), likely correctable if you refinished the stock but probably not worth the effort.. Grade of wood I would say is standard to slightly above standard (nothing I would really WOW over, but better than apple crate). I would say the quality of work is "very advanced/skilled amateur", but not reaching the level of professional.

Unfortunately I don't have a gun to put this on to get measurements from at the moment. According to Wenig's website: "Approximate dimensions for the New American Style are 1-3/8 x 1-3/8 x 2-1/2 x 14-1/4 with a 1/4" offset comb and a 3/8" toe out (no offset at heel). This style also features a palm swell and 3" grip length from back of trigger guard." Doing some rough guesstimate/interpolation, it looks like the LOP should be around 14.5ish" if you install a 1" pad.

I will sell this with a 3 day inspection, return accepted in same condition sent, buyer covers shipping both ways if returned, so you can put it on your gun and verify fit. Does not include recoil pad, does not include forend; what you see is what you get.

$265 shipped.

 

Is this still available? Length of pull?
Brian Fink
785-534-2422