Firing pin oval hole Perazzi TM1

I am getting an oval hole on the firing pin of my early TM1. Who do you recommend to do the insert thing if that is what it needs? tia

 

I have seen a few TM1's butchered repairing that.

 

Giacamo is the Perazzi Specialist, 315-336-1356

GB................................DLS

 

Laibs Gunsmithing!

 

I think a good repair would be have a sleeve made to slip in the Firing pin all the way through to chamber, then have a Step Drill or Reamer bore a new hole and use Blue Loctite to hold it in place, and install a new Firing pin, this would be cheaper and easier than a Laib's job, Perazzi could mfgr them, or a tool designer here in the USA. I hope you guys understand what I am saying, A sleeve to the Dimension of the Firing pin, which would require a larger 2 step hole and a sleeve, like a new Chamber Sleeve

GB...........................................DLS

 

Laib's Gunsmithing & CSTM Guns

201 Highway 23 NE
Spicer, MN 56288
320-796-2686

Pat has the insert you need. I had him do the same thing to my 3200. Great job.

 

Pat is who I recommend to the Perazzi's I get in for repairs.

Whiz