Suggestion for 20 ga powder/wad

Getting ready to start reloading 20 ga and looking for load suggestions. 7/8 ounce for sporting

 

Here are some suggestions;
Winchester Super Field
Alliant 20/28
Winchester 572

 

Longshot

GB...........................DLS

 

Alliant 20/28 does a good job
15.5 gr
CB1078-20
Win 209
Rem ACF hulls
Works great for Skeet and Trap

 

Figure which hull you will be using and get back with us.

 

All of my 20ga trap recipes are for 3/4 oz 7 1/2 and use Green Dot in Federal Hulls with 209A Federal Primers. Load came from Hodgdon site.

20/28 is on my shelf but I have not rolled any yet.

 

Be wary of using Green Dot in subgauge tubes, regardless if it is a recipe.

20/28 is going to be one of the great powders out there.

 

20/28 also E3

 

E3 has the same burn speed as Red Dot. Not for small bores.

 

20/28 !!!!!

 

20/28 is a great powder, Winchester Super Field (WSF) has better stack height in AA hulls. Longshot is good.in the AA hull.

 

20/28 powder with CB-1078 wad, Win primers, AAHS hulls, 8.5 shot. WFM and everything fits just right.
I've also used Unique powder with these same components but prefer 20/28.

 

I like Unique and green dot,20 28 is a great powder by seems a little snappy to me.

 

I've used Unique for more years than I care to admit! It's also great for 12 ga handicap and 28 ga. I also like not having 4 different powders for different gauges. It's also still made here in the US, and is less expensive than many other powders.

 

20/28 or Unique. I like both.